Contributing Patches to Gambit Source Code
From Gambit wiki
*** THIS SECTION IS OUTDATED AND WILL BE REWRITTEN SOON ***
Each developer uses a local copy of the central repository. The copies can be edited independently using any tool (editors, utility programs, etc). When a developer completes making a set of related changes they are recorded as a patch (also called a changeset). The developer can then contribute the patch by submitting it to the Gambit maintainers. If the patch is accepted then it will be applied to the repository by the Gambit maintainers and will become part of the central repository.
This page only gives the main Mercurial commands that are needed to manage the local copy of the central repository. Please read the Mercurial manual for detailed usage instructions.
Prebuilt distributions of Mercurial and a source code distribution are available here. Please follow the installation instructions on the Mercurial web site. Note that version 0.9.1 is not recent enough; but 0.9.3 and 0.9.4 should work!
To simplify usage of Mercurial the configuration file $HOME/.hgrc should be created and contain at least your username. There are many settings that can be specified such as the editor to use for entering the comment attached to a patch. For example, to use emacs:
# Mercurial configuration file. [ui] username = John Doe <email@example.com> editor = emacs -nw
If you want to use emacs' ediff to merge conflicting changes follow these instructions.
Obtaining a local copy of the Gambit source code
The best way to obtain a local copy of the Gambit source code is to download and unpack a recent source code release. Normally the most recent source code release should be downloaded.
wget http://www.iro.umontreal.ca/~gambit/download/gambit/v4.0/source/gambc-v4_0_0.tgz tar zxf gambc-v4_0_0.tgz mv gambc-v4_0_0 gambit
Note that in anticipation of making changes to the source code the directory has been renamed to gambit to avoid thinking it is a pristine copy of a particular release.
The system should then be prepared for modifications of the Scheme source code by creating a compiler for bootstrapping:
cd gambit ./configure make bootstrap
This will create the gsc-comp compiler, which is executed when a Scheme source code file in the Gambit system must be compiled following a change.
Synchronizing with the central source code repository
The Mercurial pull command downloads to the local copy all the changesets from the central source code repository.
The local source code files can then be updated to contain the latest source code with the command:
This will call the Mercurial update command in a loop, so that the Gambit compiler for each release between the local copy's release and the most recent release are built in succession. This is necessary because the Gambit system is bootstrapped with itself, and to compile the runtime system for a specific version the Gambit compiler for that version must be used. If for some reason you need to do this manually the following procedure should be used. Assuming the local copy is currently at release v1.2.3 and that v1.2.5 is the most recent release, do this:
hg update -r v1.2.4-bootstrap make bootstrap hg update -r v1.2.4 make clean bootstrap hg update -r v1.2.5-bootstrap make bootstrap hg update make clean bootstrap
Note that the latest source code may be unstable. It is wise to check that it passes basic consistency checks by running the command make check.
The local source code files can be updated to a specific version with the -r option to the Mercurial update command.
hg update -r v4.0.0
After this command it is not possible to build Gambit with a make because the local gsc-comp is not the appropriate version to compile the runtime system. One way around this problem is to download the release for that version in a different directory, do a make bootstrap in that directory, and then copy gsc-comp back here.
Creating a patch
After making a set of related changes to the local copy of the repository, a patch is created with the command:
This command will pop up an editor to compose a comment describing the nature of the patch. Please use a short but descriptive comment. You can save some typing by adding the comment on the command line:
hg commit -m "Fixed bug in ,b command"
To get a list of the patches (starting with the latest, i.e. the tip) use the log command:
Contributing a patch
A patch file can be created using the export command. To include only the most recent patch use:
hg export tip > my-patch
A range of patches can be included like this:
hg export 4:6 > my-patch
The patch file can then be submitted to the Gambit maintainers by sending the file by email to firstname.lastname@example.org. For example:
mail -s "[PATCH] ,b command fix" email@example.com < my-patch
Releasing a new version of Gambit
This section contains some notes for the Gambit maintainers. It explains the steps to follow to release a new version of Gambit. The steps must be followed carefully or you may end up with a wedged system!
Assume the latest release of Gambit is v1.2.3 and the new release will be v4.5.6. Because Gambit is bootstrapped with itself, releasing a new version of Gambit is a two step process. The Gambit compiler must first be modified so that it generates C code which references the gambit.h file version v4.5.6. Then the gambit.h file, configure.ac file, and other files with an embedded version number must be updated so they refer to version v4.5.6.
1. Creating a Gambit compiler for version v4.5.6
Make sure you have a working bootstrap compiler (gsc-comp) and save a copy just in case:
make check make bootstrap cp gsc-comp gsc-comp.old
Now modify the definition of compiler-version in the file gsc/_parms.scm so that it refers to v4.5.6 (using a single integer encoding of the version number):
(define (compiler-version) 405006) ;; 100000*major + 1000*minor + revision
Now create the new bootstrap compiler and commit the change with an easily identifiable comment:
make bootstrap hg commit -m "[COMPILER CHANGES NEEDED FOR v4.5.6] Changed version in compiler" hg tag v4.5.6-bootstrap
Note that at this very point the new compiler will not pass the tests because the runtime still expects the old version number.
2. Upgrading the runtime files from version v1.2.3 to v4.5.6
For the C files generated from Scheme files the version numbers can easily be upgraded by compiling them from scratch using the new Gambit compiler. This will be done automatically by a make after a make clean. The other changes to the files are made by running the script misc/changev (this must be done first because it changes the file configure.ac which produces the configure script which must be run again).
misc/changev 102003 405006 make clean ./configure make make check # will fail test5 because version numbers have changed mv tests/mix.c tests/test5.ok make check # this time all tests should pass hg commit -m "[RUNTIME CHANGES NEEDED FOR v4.5.6] Changed version of runtime using misc/changev" hg tag v4.5.6
3. Creating prebuilt installers for version v4.5.6
To create prebuilt installers for Mac OS and Windows you need a Mac with Xcode and Parallels workstation with Windows and the MinGW and Microsoft Visual C Express environments. The following command will build all variants of the installers (it takes about 2 hours in total):
If no errors were reported then you can upload the new release to the Gambit repository using:
This will automatically send an announcement on the Gambit mailing list. You must manually update the main page of the Gambit Wiki so that it refers to the latest version.
Step 1 and 2 in the above instructions are executed with the change-version make target:
make NEW_VERSION=v4.5.6 change-version
Alternatively, the new-revision, new-minor, or new-major make targets can be used to compute the new version number from the current version by incrementing one of the version number fields: